Looking for a code for sky handset - Technical

Ewanb75 · 15-05-2007, 14:55

So I can use it with my new tele. Logik 37" HD lcd.

Been on web, round sky, etc. If anyone knows it, can they let me and anyone else know

TY

coopermanyorks · 15-05-2007, 15:13

Hi

Have you tried the sky interactive site via the red button ?

Do you know the rev of the Sky remote you have , look under the battery panel

Ewanb75 · 15-05-2007, 15:25

Revision 6 and yes tried the site, and also phoned them. The codes i got from the IT Dept. didnt worked either.

I may just have to wait til they are upd8d, it was just incase someone had the code here.

coopermanyorks · 15-05-2007, 15:37

Quote:

Originally Posted by Ewanb75

Revision 6 and yes tried the site, and also phoned them. The codes i got from the IT Dept. didnt worked either.

I may just have to wait til they are upd8d, it was just incase someone had the code here.

Hi

If you post the full Logik model number , I 'll have a look around for you

Ewanb75 · 15-05-2007, 15:49

Quote:

Originally Posted by coopermanyorks

Hi

If you post the full Logik model number , I 'll have a look around for you

LCXW37HD1

thankyou

banbury_oddball · 17-05-2007, 08:55

How about...

221, 033, 061, 039

TO PROGRAM THE remote USING THE 3 DIGIT CODE:

1. Turn on the TV receiver

2. Press TV on the Sky Remote Control

3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice.

4. Enter three digit code from list for the receiver (early versions now flash twice).

5. Press select to enter code structure (the LED will flash twice if a valid code has been entered).

6. Now press the STDBY button and test other functions.

Repeat if necessary until a code is found that works most common functions.

They are the only codes I can see listed at this time. May be worth an e-mail to Logik to see if they know of one...

Ewanb75 · 21-05-2007, 01:59

Thanks for those Banbury, unfortunately, my sky and tele is lookin for a 4 digit code

coopermanyorks · 21-05-2007, 09:01

Quote:

Originally Posted by Ewanb75

Thanks for those Banbury, unfortunately, my sky and tele is lookin for a 4 digit code

Hi

Try adding a " 0 " in front of the 3 digit code

Just to clarify , Is your Tv Logix , Logik or Logic

Logik codes I can see are 1245 or 0908

Or use the 3 digit set up

Ewanb75 · 21-05-2007, 19:05

Still no luck, it flashes twice when i enter "0039" but the tv doesnt respond to the remote. And it is a LOGIK

coopermanyorks · 21-05-2007, 19:16

Quote:

Originally Posted by Ewanb75

Still no luck, it flashes twice when i enter "0039" but the tv doesnt respond to the remote. And it is a LOGIK

Hi

All I can suggest is buy a rev8 Sky+ remote , they are around £10 on Ebay and carries onboard many new codes for later Tvs

You access these new in built codes by using the 4 digit set the final part is this .......

Quote:

Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).

MartinPickering · 21-05-2007, 21:43

Just out of interest, if you can buy a new Sky-HD remote for "around £10" it's probably stolen. We can't even buy them in bulk at that price. It's up to your conscience.

Robbie01 · 22-05-2007, 00:04

Can you try 0042?

This site: http://www.thedigiboxshop.com/where-...rol-codes.html

gives codes for remotes, and the only 4 digit code it has for Logik is 0042.

From the site:

4 Digit Codes

1. Turn your TV on.

2. Press tv on your Sky remote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

4. Press tv on your Sky remote control again.

5. Key in the four digit code for your brand of TV (see below). The light on the Sky remote control blinks twice. If the light blinks once only, recheck the code for your brand of TV and start again at Step 1.

6. Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).

If at this point the LED on the Sky remote control blinks three times then all possible codes for that make of receiver have been checked. Repeat from step one, ensuring that you enter the correct manufacturer code.

At the end of the sequence, if you see the TV Guide screen, the remote control setup process is complete. If you did not see the TV Guide screen, you must now complete the following steps. 8. Press tv on your Sky remote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV.

11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

4 Digit Codes: 0442,

radiosgalore · 23-05-2007, 07:51

my bush tv model BTV180T isnt even listed in the sky menus. thedigiboxshop.com has only one code and it doesnt work.

15-05-2007, 14:55	#1
Ewanb75 Forum Member Join Date: May 2007 Location: Dumfries, Scotland Services: BT, Sky, Xbox Live Gold Posts: 222	Looking for a code for sky handset So I can use it with my new tele. Logik 37" HD lcd. Been on web, round sky, etc. If anyone knows it, can they let me and anyone else know TY

15-05-2007, 15:13	#2
coopermanyorks Forum Member Join Date: Jan 2003 Gender: Male Location: Pontefract -In Gods Own County Services: IP3gs - Pace HD & Pvr3's in Multiroom-Sky 6 mix - Sports Posts: 17,111 Blog Entries: 1	Hi Have you tried the sky interactive site via the red button ? Do you know the rev of the Sky remote you have , look under the battery panel

15-05-2007, 15:25	#3
Ewanb75 Forum Member Join Date: May 2007 Location: Dumfries, Scotland Services: BT, Sky, Xbox Live Gold Posts: 222	Revision 6 and yes tried the site, and also phoned them. The codes i got from the IT Dept. didnt worked either. I may just have to wait til they are upd8d, it was just incase someone had the code here.

17-05-2007, 08:55	#6
banbury_oddball Forum Member Join Date: May 2001 Location: Banbury Services: Sky HD, Sky Broadband, Sony Eric K850i. Toshiba 37XV505DB HDTV Posts: 1,043	How about... 221, 033, 061, 039 TO PROGRAM THE remote USING THE 3 DIGIT CODE: 1. Turn on the TV receiver 2. Press TV on the Sky Remote Control 3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice. 4. Enter three digit code from list for the receiver (early versions now flash twice). 5. Press select to enter code structure (the LED will flash twice if a valid code has been entered). 6. Now press the STDBY button and test other functions. Repeat if necessary until a code is found that works most common functions. They are the only codes I can see listed at this time. May be worth an e-mail to Logik to see if they know of one...

21-05-2007, 01:59	#7
Ewanb75 Forum Member Join Date: May 2007 Location: Dumfries, Scotland Services: BT, Sky, Xbox Live Gold Posts: 222	Thanks for those Banbury, unfortunately, my sky and tele is lookin for a 4 digit code

21-05-2007, 19:05	#9
Ewanb75 Forum Member Join Date: May 2007 Location: Dumfries, Scotland Services: BT, Sky, Xbox Live Gold Posts: 222	Still no luck, it flashes twice when i enter "0039" but the tv doesnt respond to the remote. And it is a LOGIK

21-05-2007, 21:43	#11
MartinPickering Forum Member Join Date: Sep 2003 Location: A small Greek island Services: Slingbox/Freesat Posts: 336	Just out of interest, if you can buy a new Sky-HD remote for "around £10" it's probably stolen. We can't even buy them in bulk at that price. It's up to your conscience.

22-05-2007, 00:04	#12
Robbie01 Forum Member Join Date: Nov 2002 Location: Wearside Services: Sky, BT Broadband, Freeview Posts: 624	Can you try 0042? This site: http://www.thedigiboxshop.com/where-...rol-codes.html gives codes for remotes, and the only 4 digit code it has for Logik is 0042. From the site: 4 Digit Codes 1. Turn your TV on. 2. Press tv on your Sky remote control. 3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice. 4. Press tv on your Sky remote control again. 5. Key in the four digit code for your brand of TV (see below). The light on the Sky remote control blinks twice. If the light blinks once only, recheck the code for your brand of TV and start again at Step 1. 6. Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code). If at this point the LED on the Sky remote control blinks three times then all possible codes for that make of receiver have been checked. Repeat from step one, ensuring that you enter the correct manufacturer code. At the end of the sequence, if you see the TV Guide screen, the remote control setup process is complete. If you did not see the TV Guide screen, you must now complete the following steps. 8. Press tv on your Sky remote control. 9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice. 10. Key in the number of the channel on your TV that you use for watching satellite TV. 11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete. 4 Digit Codes: 0442,

23-05-2007, 07:51	#13
radiosgalore Forum Member Join Date: May 2005 Location: Birmingham Services: Sky Digital, VM TV size L DAB, 2M,70cm Ham radio Posts: 3,873 Blog Entries: 5	my bush tv model BTV180T isnt even listed in the sky menus. thedigiboxshop.com has only one code and it doesnt work.