Tech
This procedure is used to establish which three digit code has been programmed into the Sky Remote.
It is useful to find out which code is being used so that the same code can be re-entered when batteries are replaced or the RCU loses the memory settings for any reason.
1. Press the TV button on the Sky Remote Control Unit.
2. Press and Hold down the Select and Red buttons simultaneously on the Sky RCU until the LED blinks (flashes) twice.
3. Press the numbers 9,9,0 on the Remote Control Unit.
4. Key in 1 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the first digit of the code.
5. Key in 2 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the second digit of the code.
6. Key in 3 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the third digit of the code.
Once the 3 digit code has been identified, the Remote Control Unit can then be reprogrammed using the Direct Set procedure.
It is useful to find out which code is being used so that the same code can be re-entered when batteries are replaced or the RCU loses the memory settings for any reason.
1. Press the TV button on the Sky Remote Control Unit.
2. Press and Hold down the Select and Red buttons simultaneously on the Sky RCU until the LED blinks (flashes) twice.
3. Press the numbers 9,9,0 on the Remote Control Unit.
4. Key in 1 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the first digit of the code.
5. Key in 2 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the second digit of the code.
6. Key in 3 on the RCU and count the number of times the LED blinks. The number of blinks will indicate the third digit of the code.
Once the 3 digit code has been identified, the Remote Control Unit can then be reprogrammed using the Direct Set procedure.
More: Tech, Satellite TV
